Vol. 27 No. 1 (2026)

This issue focuses on improving thermal and mechanical performance using advanced and sustainable materials combined with numerical analysis such as Finite Element Analysis.

Published: 2026-01-31

Articles

  • Utilization of greensand dust as a substitute for bentonite to increase the strength of sand molds and reduce casting waste.
    THE EFFECT OF USING DUST AS A BENTONITE SUBSTITUTION ON THE CHARACTERISTICS OF RECYCLED GREENSAND MOLDS
    Hariningsih Hariningsih (1), Tasha Rizka (2)
    (1) Program Studi D-IV Teknologi Rekayasa Perancangan Manufaktur Politeknik Manufaktur Ceper, Klaten, Indonesia ,
    (2) Program Studi D-III Teknologi Pengecoran Logam Politeknik Manufaktur Ceper, Klaten, Indonesia
    1-8
    DOI : 10.23917/mesin.v27i1.9939
    Abstract View : 19
    pdf downloads: 58
    DOI: https://doi.org/10.23917/mesin.v27i1.9939
  • Pengaruh sudut sirip pendingin aluminium terhadap penurunan suhu kerja dan efisiensi panel surya.
    STUDY ON THE INFLUENCE OF THE ANGULAR DIRECTION OF ALUMINUM COOLING FINS ON THE WORKING TEMPERATURE OF SOLAR PANELS
    Binyamin Binyamin (1), Muhammad Riswan (2), Andi Nugroho (3), Eko Julianto (4)
    (1) Department of Mechanical Engineering Universitas Muhammadiyah Kalimantan Timur, Samarinda, Indonesia ,
    (2) Department of Mechanical Engineering Universitas Muhammadiyah Kalimantan Timur, Samarinda, Indonesia ,
    (3) Department of Mechanical Engineering Universitas Muhammadiyah Kalimantan Timur, Samarinda, Indonesia ,
    (4) Department of Mechanical Engineering Universitas Muhammadiyah Pontianak, Pontianak, Indonesia
    9-21
    DOI : 10.23917/mesin.v27i1.8587
    Abstract View : 10
    pdf downloads: 38
    DOI: https://doi.org/10.23917/mesin.v27i1.8587
  • SiO2 Nanofluid manufacturing process
    ENHANCEMENT OF HEAT TRANSFER PERFORMANCE OF FLAT VERTICAL TUBE USING SIO2/WATER NANOFLUIDS
    Eqwar Saputra (1), Arif Surono (2), Andi Prasetyo (3), Dini Nur Afifah (4), Janatin Nur Aripin (5)
    (1) Department of Mechanical Engineering, Faculty of Engineering and Science, Universitas Muhammadiyah Purwokerto, Indonesia ,
    (2) Department of Automotive Engineering, Politeknik Indonusa Surakarta, Indonesia ,
    (3) Department of Mechanical Engineering, Faculty of Engineering, Universitas Nahdatul Ulama Surakarta, Indonesia ,
    (4) Department of Chemical Engineering, Faculty of Engineering and Science, Universitas Muhammadiyah Purwokerto, Indonesia ,
    (5) Department of Medical Laboratory Technology, Faculty of Health Sciences, Universitas Muhammadiyah Purwokerto, Indonesia
    22-30
    DOI : 10.23917/mesin.v27i1.12615
    Abstract View : 5
    pdf downloads: 20
    DOI: https://doi.org/10.23917/mesin.v27i1.12615
  • Schematic characterization process
    STRUCTURAL AND OPTICAL CHARACTERIZATION OF HEAT-TREATED SIC PARTICLES DERIVED FROM RICE HUSK ASH FOR PHOTOVOLTAIC
    Ramzul Irham Riza (1), Ngafwan (2), Masyrukan (3), Ridwan Krisnoadi (4), Adhyaka Billy Kurniawan (5)
    (1) Universitas Muhammadiyah Surakarta, Indonesia ,
    (2) Universitas Muhammadiyah Surakarta , Indonesia ,
    (3) Universitas Muhammadiyah Surakarta , Indonesia ,
    (4) Universitas Muhammadiyah Surakarta , Indonesia ,
    (5) Universitas Muhammadiyah Surakarta , Indonesia
    31-41
    DOI : 10.23917/mesin.v27i1.16145
    Abstract View : 7
    pdf downloads: 14
    DOI: https://doi.org/10.23917/mesin.v27i1.16145
  • Meshing
    NUMERICAL INVESTIGATION OF THICKNESS AND MATERIAL EFFECTS ON THE MECHANICAL BEHAVIOR OF MILD STEEL DAMPERS USING FINITE ELEMENT ANALYSIS
    Iskandar Yasin (1), Widarto Sutrisno (2), Nurul Hasan (3), Andi Ibrahim Soumi (4)
    (1) Universitas Sarjanawiyata Tamansiswa, Indonesia ,
    (2) Universitas Sarjanawiyata Tamansiswa, Indonesia ,
    (3) Don Computing Pty Ltd, Australia ,
    (4) Universitas Sarjanawiyata Tamansiswa, Indonesia
    42-67
    DOI : 10.23917/mesin.v27i1.16741
    Abstract View : 7
    pdf downloads: 40
    DOI: https://doi.org/10.23917/mesin.v27i1.16741