General design criteria for neonatal temperature monitoring sensor using "smart material" conducting polymer development: A review

Nor Syamimi; Shuhaida Yahud

doi:10.23917/arstech.v2i1.185

Authors

Nor Syamimi Biomedical Electronic Engineering, School of Mechatronic, Perlis, Malaysia
Malaysia
Shuhaida Yahud Biomedical Electronic Engineering, School of Mechatronic, Perlis, Malaysia
Malaysia

DOI:

https://doi.org/10.23917/arstech.v2i1.185

Keywords:

Conducting material, Flexible temperature sensor, Neonates , Patient monitoring, Thermistor

Abstract

Surface thermistors are being currently used in patient monitoring, including temperature monitoring among neonates. However, these thermistors are reported as being mechanically rigid. This review article aims to provide researchers with a guide to better design a flexible neonatal temperature monitoring sensor. A literature search was conducted to obtain available literature on temperature sensors with specific attention to designing flexible temperature sensors. The achievement of a flexible type thermistor for neonates requires a basic understanding of the thermistor. Also, the conducting polymer material being used and the rationale for their placement. The updated technology in thermistors should be made flexible for the ease of neonates during monitoring. Careful considerations for the design and conduct of flexible temperature sensor research as outlined in this review would help to enhance the quality and comparability of future research studies. Considerations for efficient neonatal temperature monitoring and protection include accuracy, sensor's size, weight, material, and sensor placement. Flexible sensors could be the alternative to conventional bulky and stiff temperature sensors.

Downloads

Download data is not yet available.

References

L. Suresh, N.A. Latha, B.R. Murthy, K.T. Alam, and K.J. Babu, 'Neonatal monitoring system', Int. Journal of Engineering Research and Applications, Vol. 4, No. 7, pp. 12-15, 2014.

V. Somerset, 'Intelligent and biosensors', BoD–Books on Demand, 2010.

A.K. Abbas, K. Heimann, K. Jergus, T. Orlikowsky, and S. Leonhardt, 'Neonatal non-contact respiratory monitoring based on real-time infrared thermography', Biomedical engineering online, Vol. 10, No. 1, pp. 1-17, 2011. https://doi.org/10.1186/1475-925X-10-93

J.G. Webster, 'Medical instrumentation application and design', John Wiley & Sons, 2009.

K. Xu, Y. Lu, and K. Takei, 'Multifunctional skin?inspired flexible sensor systems for wearable electronics', Advanced Materials Technologies, Vol. 4, No. 3, pp. 1800628, 2019. https://doi.org/10.1002/admt.201800628

T.A. Tisa, Z.A. Nisha, and M.A. Kiber, 'Design of an enhanced temperature control system for neonatal incubator', Bangladesh Journal of Medical Physics, Vol. 5, No. 1, 2013. https://doi.org/10.3329/bjmp.v5i1.14668

Z. Zhu, T. Liu, G. Li, T. Li, and Y. Inoue, 'Wearable sensor systems for infants', Sensors, Vol. 15, No. 2, pp. 3721-3749, 2015. https://doi.org/10.3390/s150203721

T. Yamada, and T. Watanabe, 'Development of a small pressure-sensor-driven round bar grip measurement system for infants', The SICE Annual Conference 2013, pp. 259-264, 2013. https://doi.org/10.1299/kikaic.79.743

J. Smith, 'Thermoregulation and temperature taking in the developing world: A brief encounter', Journal of Neonatal Nursing, Vol. 20, No. 5, pp. 218-229, 2014. https://doi.org/10.1016/j.jnn.2014.03.002

W. Chen, S. Dols, S.B. Oetomo, and L. Feijs, 'Monitoring body temperature of newborn infants at neonatal intensive care units using wearable sensors', Proceedings of the Fifth International Conference on Body Area Networks, pp. 188-194, 2010. https://doi.org/10.1145/2221924.2221960

S. Pouy, and M.m. Chehrzad, 'Identification the best skin temperature probe attachment place in premature neonates nursed under radiant warmers in NICU: A diagnostic clinical trial study', Journal of Neonatal Nursing, Vol. 25, No. 2, pp. 69-73, 2019. https://doi.org/10.1016/j.jnn.2018.10.001

W. Chen, S.B. Oetomo, L. Feijs, S. Bouwstra, I Ayoola, and S. Dols, 'Design of an integrated sensor platform for vital sign monitoring of newborn infants at neonatal intensive care units', Journal of Healthcare Engineering, Vol. 1, No. 4, pp. 535-554, 2010. https://doi.org/10.1260/2040-2295.1.4.535

D.P. Jones, 'Biomedical sensors' Momentum press, LLC, New York, 2010.

Y. Qi, H. Nguyen, K.S.E. Lim, W. Wang, and W. Chen, 'Adsorptive Spin Coating To Study Thin-Film Stability in Both Wetting and Nonwetting Regimes', Langmuir, Vol. 35, No. 21, pp.6922-6928, 2019. https://doi.org/10.1021/acs.langmuir.9b00923.

V. Thomsen, 'Response time of a thermometer', The Physics Teacher 36, 540(1998), pp. 540-541. 1999. https://doi.org/10.1119/1.880128

R.B. Knobel-Dail, 'Preventing hypothermia in pre-term infants: a program of research', Rwanda Journal, Vol. 2, No. 2, pp. 57-61, 2015. https://doi.org/10/0.4314/rj.v2i2.10F.

A. Saleh, M.A. Mousa, A.M. Alfaifi, A.E. Negm, and M.O. Ali, ' The impact of calibration on medical devices performance and patient safety ', Biomedical Research, Vol. 29, No. 12, 2018. https://doi.org/10.4066/biomedicalresearch.29-18-550

E. Denton, A. Heng, and B. Fisher, 'Wearable temperature sensing layout considerations optimised for thermal response', Application Report, 2018.

Neotech, 'NeoSmileTM temperature probe cover', 2020. https://www.neotechproducts.com/product/neosmile/.

K. Bhatt, 'Thermistors-development, manufacture and applications', IEE-IERE Proceedings-India, Vol. 11, No. 5, pp. 194-203, 1973.

J. Webster, 'Medical instrumentation: Application and design', The fourth edition, John Wiley & Sons, 2009.

I. Sinclair, 'Sensors and transducers', The third edition, Newnes, 2001.

N. Gupta, S. Sharma, I.A. Mir, and D. Kumar, 'Advances in sensors based on conducting polymers', Journal of Scientific and Industrial Research, Vol. 65, No. 7, pp. 549-557, 2006. http://nopr.niscair.res.in/handle/123456789/4862.

G. Pandey and A. Vora, 'Open electronics for medical devices: state-of-art and unique advantages', Electronics, Vol. 8, No. 11, pp. 1256, 2019. https://doi.org/10.3390/electronics8111256

A. Servati, L. Zou, Z.J. Wang, F. Ko, and P. Servati, 'Novel flexible wearable sensor materials and signal processing for vital sign and human activity monitoring', Sensors, Vol. 17, No. 7, pp. 1622, 2017. https://doi.org/10.3390/s17071622

Q. Li, L.N. Zhang, X.M. Tao, and X. Ding, 'Review of flexible temperature sensing networks for wearable physiological monitoring', Advanced healthcare materials, Vol. 6, No. 12, pp. 1601371, 2017. https://doi.org/10.1002/adhm.201601371

G. Lavenuta, 'Negative temperature coefficient thermistors part I: Characteristics, materials, and configurations', Cornerstone Sensors, Inc. and Sensors Magazine, 1997.

K.H. Koh, and C.W. Yu, 'Comparing the accuracy of skin sensor temperature at two placement sites to axillary temperature in term infants under radiant warmers', Journal of Neonatal Nursing, Vol. 22, No. 4, pp. 196-203, 2016. https://doi.org/10.1016/j.jnn.2016.01.003

S. Mazgaoker, I. Ketko, R. Yanovich, Y. Heled, and Y. Epstein, 'Measuring core body temperature with a non-invasive sensor', Journal of thermal biology, Vol. 66, pp. 17-20, 2017. https://doi.org/10.1016/j.jtherbio.2017.03.007

O. Bonner, K. Beardsall, N. Crilly, and J. Lasenby, "There were more wires than him': the potential for wireless patient monitoring in neonatal intensive care', BMJ innovations, Vol. 3, No. 1, pp. 12-18, 2017. http://dx.doi.org/10.1136/bmjinnov-2016-000145

D. Ogoina, 'Fever, fever patterns and diseases called 'fever' – A review', Journal of Infection and Public Health, Vol. 4, No. 3, pp. 108-124. https://doi.org/10.1016/j.jiph.2011.05.002

M. Sund?Levander, C. Forsberg, and L.K. Wahren, 'Normal oral, rectal, tympanic and axillary body temperature in adult men and women: a systematic literature review', Scandinavian journal of caring sciences, Vol. 16, No. 2, pp. 122-128, 2002. https://doi.org/10.1046/j.1471-6712.2002.00069.x

C. Yan, J. Wang, and P.S. Lee, 'Stretchable graphene thermistor with tunable thermal index', ACS nano, Vol. 9, No. 2, pp. 2130-2137, 2015. https://doi.org/10.1021/nn507441c

C.-C. Huang, Z.-K. Kao, and Y.-C. Liao, 'Flexible miniaturised nickel oxide thermistor arrays via inkjet printing technology', ACS applied materials & interfaces, Vol. 5, No. 24, pp. 12954-12959, 2013. https://doi.org/10.1021/am404872j

Y. Khan, M. Garg, Q. Gui, M. Schadt, A. Gaikwad, D. Han, N.A. Yamamoto, P. Hart, R. Welte, W. Wilson, S. Czarnecki, M. Poliks, Z. Jin, K. Ghose, F. Egitto, J. Turner, A.C. Arias, 'Flexible hybrid electronics: Direct interfacing of soft and hard electronics for wearable health monitoring', Advanced Functional Materials, Vol. 26, No. 47, pp. 8764-8775, 2016. https://doi.org/10.1002/adfm.201603763

V. Lebedev, E. Laukhina, V. Laukhin, A. Somov, A.M. Baranov, C. Rovira, and J. Veciana, 'Investigation of sensing capabilities of organic bi-layer thermistor in wearable e-textile and wireless sensing devices', Organic Electronics, Vol. 42, pp. 146-152, 2017. https://doi.org/10.1016/j.orgel.2016.12.034

T.-H. Le, Y. Kim, and H. Yoon, 'Electrical and electrochemical properties of conducting polymers', Polymers, Vol. 9, No. 4, pp. 150, 2017. https://doi.org/10.3390/polym9040150

J.V. Thombare, M.C. Rath, S.-H. Han, and V.J. Fulari, 'Synthesis of hydrophilic polypyrrole thin films by silar method', Materials Physical Mechanics, Vol. 16, pp. 118-125, 2013.

R. Balint, N.J. Cassidy, and S.H. Cartmell, 'Conductive polymers: towards a smart biomaterial for tissue engineering', Acta biomaterialia, Vol. 10, No. 6, pp. 2341-2353, 2014. https://doi.org/10.1016/j.actbio.2014.02.015

Ye.P. Mamunya, V.V. Davydenko, P. Pissis, and E.V. Lebedev, 'Electrical and thermal conductivity of polymers filled with metal powders', European polymer journal, Vol. 38, No. 9, pp. 1887-1897, 2002. https://doi.org/10.1016/S0014-3057(02)00064-2

L. György, 'Conducting polymers: A new era in electrochemistry', Springer, 2008.

I. Bahadur, 'Synthesis and characterisation of pure and doped conducting and Semiconducting materials', Theses, Department of Physics, University of Lucknow, 2015. http://hdl.handle.net/10603/44763

Kaur, G., Adhikari, R., Cass, P., Bown, M., and Gunatillake, P.: 'Electrically conductive polymers and composites for biomedical applications', RSC Advances, Vol. 5, No. 47, pp. 37553-37567, 2015. https://doi.org/10.1039/C5RA01851J

C. Lucarotti, C.M. Oddo, N. Vitiello, and M.C. Carrozza, 'Synthetic and bio-artificial tactile sensing: A review', Sensors, Vol. 13, No. 2, pp. 1435-1466. 2013. https://doi.org/10.3390/s130201435

L. Biagiotti, F. Lotti, C. Melchiorri, and G. Vassura, 'An integrated approach to the design of complex robotic end-effectors', Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), Vol. 1, pp. 70-75, 2003. https://doi.org/10.1109/AIM.2003.1225074.