Vol. 26 No. 2 (2025)

This issue focuses on material with the recent manufacturing process of 3D printing and the latest analytical review of the material numerically by using FEM Simulation.

Published: 2025-08-01

Articles

  • Cover Image
    DESIGN AND SAFETY FACTOR SIMULATION OF AN AUTOMATED FEEDER FOR BLANKING MACHINES
    Hendi Lilih Wijayanto (1), Zulfianti (2), Yusdianto (3), Hairun Apriadi Ramadhan S (4), Usman (5)
    (1) Politeknik Industri Logam Morowali, Morowali, Indonesia , Indonesia ,
    (2) Politeknik Industri Logam Morowali, Morowali, Indonesia, Indonesia ,
    (3) Politeknik ATI Makassar, Makassar, Indonesia , Indonesia ,
    (4) Politeknik Industri Logam Morowali, Morowali, Indonesia, Indonesia ,
    (5) Politeknik Industri Logam Morowali, Morowali, Indonesia , Indonesia
    98 - 111
    DOI : 10.23917/mesin.v26i2.6977
    Abstract View : 16
    pdf downloads: 50
    DOI: https://doi.org/10.23917/mesin.v26i2.6977
  • Cover Image
    DEVELOPMENT AND ANALYSIS OF A 7040 PROPELLER AIRSCREW TEST BENCH USING EXPERIMENTATION AND CFD
    Sarjito Sarjito (1), Anggit Bayu Prabowo (2), Wijianto Wijianto (3), Buyung Junaidin (4)
    (1) Universitas Muhammadiyah Surakarta, Indonesia ,
    (2) Universitas Muhammadiyah Surakarta, Indonesia ,
    (3) Universitas Muhammadiyah Surakarta, Indonesia ,
    (4) Institute Teknologi Dirgantara Adisutjipto, Indonesia
    71-84
    DOI : 10.23917/mesin.v26i2.12059
    Abstract View : 18
    pdf downloads: 8
    DOI: https://doi.org/10.23917/mesin.v26i2.12059
  • Cover Image
    NUMERICAL AND ANALYTICAL ANALYSIS OF THE SHAFT DESIGN FOR A ROTATING DRUM BIOREACTOR USING STAINLESS STEEL 304 MATERIAL
    Gladion Alim Putero (1), Rahmat Affandy (2), Mochamad Fauzi (3), Fikri Isya Zain (4), Moch. Nur Irsyad Prabawanto (5), Ahmad Khairul Faizin (6)
    (1) Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya, Indonesia ,
    (2) Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya, Indonesia ,
    (3) Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya, Indonesia ,
    (4) Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya, Indonesia ,
    (5) Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya, Indonesia ,
    (6) Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya, Indonesia
    46-58
    DOI : 10.23917/mesin.v26i2.8738
    Abstract View : 146
    PDF downloads: 126
    DOI: https://doi.org/10.23917/mesin.v26i2.8738
  • Cover Image
    OPTIMIZING PROCESS PARAMETERS FOR FILAMENT 3D PRINTING USING THERMOPLASTIC POLYURETHANE (TPU) WITH RESPONSE SURFACE METHODOLOGY (RSM)
    Umi Khulsum Salbiah (1), Apang Djafar Shieddique (2), Rohman Rohman (3)
    (1) Sekolah Tinggi Teknologi Wastukancana Purwakarta, Purwakarta, Indonesia ,
    (2) Sekolah Tinggi Teknologi Wastukancana Purwakarta, Purwakarta, Indonesia ,
    (3) Sekolah Tinggi Teknologi Wastukancana Purwakarta, Purwakarta, Indonesia
    59-70
    DOI : 10.23917/mesin.v26i2.4771
    Abstract View : 72
    PDF downloads: 93
    DOI: https://doi.org/10.23917/mesin.v26i2.4771
  • Cover Image
    DESIGN AND CFD ANALYSIS OF 1 KW PICO HYDROPOWER SIMULATOR WITH CENTRIFUGAL WATER PUMP AND FRANCIS TURBINE
    Nanang Ali Sutisna (1), Fauzan Yasa Aditama (2)
    (1) President University, Cikarang, Indonesia , Indonesia ,
    (2) President University, Cikarang, Indonesia, Indonesia
    85-97
    DOI : 10.23917/mesin.v26i2.10390
    Abstract View : 17
    pdf downloads: 59
    DOI: https://doi.org/10.23917/mesin.v26i2.10390