Vol. 25 No. 1 (2024)

This issue publishes papers from around the nation, including national. Seven manuscripts have been ready to serve an enjoyable topic: welding, fluid simulation, nanofluids material, manufacturing (milling), material testing, combustion engine, and design.

Published: 2024-09-20

Articles

  • Cover Image
    EXPERIMENTAL STUDY THE MECHANICAL PROPERTIES OF GMAW WELDING RESULTS ON S355J2+N MATERIAL WITH POST WELD HEAT TREATMENT (PWHT)
    Muhammad Arif (1), Indarto Yuwono (2), Alfi Tranggono Agus Salim (3), Alit Dharmawan (4), Dara Lathiful Zuriah (5)
    (1) Politeknik Negeri Madiun, Madiun, Indonesia ,
    (2) Politeknik Negeri Madiun, Madiun, Indonesia ,
    (3) Politeknik Negeri Madiun, Madiun, Indonesia ,
    (4) PT INKA (Persero), Madiun, Indonesia ,
    (5) PT INKA (Persero), Madiun, Indonesia
    1-9
    DOI : 10.23917/mesin.v25i1.2848
    Abstract View : 637
    pdf 2 downloads: 176
    DOI: https://doi.org/10.23917/mesin.v25i1.2848
  • Cover Image
    COMPARATIVE ANALYSIS OF PRESSURE AND FLOW CHARACTERISTICS IN BASIC AND MODIFIED AIR COMPRESSOR PIPELINE USING COMPUTATIONAL FLUID DYNAMICS IN POWER PLANT TANJUNG ENIM 3X10 MW
    Gurruh Dwi Septano (1), Tri Satya Ramadhoni (2), Herlin Sumarna (3)
    (1) Politeknik PGRI Banten, Serang, Indonesia ,
    (2) Politeknik Negeri Sriwijaya, Palembang, Indonesia ,
    (3) Politeknik Negeri Sriwijaya, Palembang, Indonesia
    10-20
    DOI : 10.23917/mesin.v25i1.2815
    Abstract View : 493
    pdf 3 downloads: 126
    DOI: https://doi.org/10.23917/mesin.v25i1.2815
  • Cover Image
    THE EFFECT OF ZNO/CUO-WATER- HYBRID NANOFLUID CONCENTRATION RATIO ON HEAT TRANSFER CHARACTERISTICS IN ELECTRONIC EQUIPMENT COOLING SYSTEMS
    Devia Gahana Cindi Alfian (1), Arvin Ade Guna Meliala (2), T. M. Indra Riayatsyah (3), Dicky Januarizky Silitonga (4)
    (1) Institut Teknologi Sumatera, Lampung, Indonesia ,
    (2) Institut Teknologi Sumatera, Lampung, Indonesia ,
    (3) Institut Teknologi Sumatera, Lampung, Indonesia ,
    (4) Institut Teknologi Sumatera, Lampung, Indonesia
    21-30
    DOI : 10.23917/mesin.v25i1.2464
    Abstract View : 469
    pdf 4 downloads: 71
    DOI: https://doi.org/10.23917/mesin.v25i1.2464
  • Cover Image
    ANALYSIS OF CUTTING FLUID ON MASS LOSS OF CARBIDE INSERT IN THE MILLING PROCESS
    Arya Rudi Nasution (1), Affandi Affandi (2), Khairul Umurani (3), Rahmatullah Rahmatullah (4), Muhammad Refan (5)
    (1) Universitas Muhammadiyah Sumatera Utara, Medan, Indonesia ,
    (2) Universitas Muhammadiyah Sumatera Utara, Medan, Indonesia ,
    (3) Universitas Muhammadiyah Sumatera Utara, Medan, Indonesia ,
    (4) Universitas Muhammadiyah Sumatera Utara, Medan, Indonesia ,
    (5) Universitas Muhammadiyah Sumatera Utara, Medan, Indonesia
    31-40
    DOI : 10.23917/mesin.v25i1.2896
    Abstract View : 459
    pdf 5 downloads: 124
    DOI: https://doi.org/10.23917/mesin.v25i1.2896
  • Cover Image
    EFFECT OF ZIGZAG AND LINE PRINTING PATTERN ON TENSILE STRENGTH AND SURFACE ROUGHNESS OF FUSED DEPOSITION MODELING PRODUCT
    Ayu Perwita Sari (1), Fatkur Rhohman (2), Ayis Nuredi Winata (3), Frendy Edo Herlanto (4), Abdul Munir Hidayat Syah Lubis (5), Agus Dwi Anggono (6)
    (1) Universitas Muhammadiyah Surakarta, Surakarta, Indonesia ,
    (2) Universitas Muhammadiyah Surakarta, Surakarta, Indonesia ,
    (3) Universitas Muhammadiyah Surakarta, Surakarta, Indonesia ,
    (4) Universitas Muhammadiyah Surakarta, Surakarta, Indonesia ,
    (5) Universitas Muhammadiyah Surakarta, Surakarta, Indonesia ,
    (6) Universitas Muhammadiyah Surakarta, Surakarta, Indonesia
    41-49
    DOI : 10.23917/mesin.v25i1.3284
    Abstract View : 349
    pdf 6 downloads: 57
    DOI: https://doi.org/10.23917/mesin.v25i1.3284
  • Cover Image
    EFFECT OF CYLINDER HEAD GASKET ADDITION AND VARYING OCTANE NUMBER GASOLINE TO INTERNAL COMBUSTION ENGINE PERFORMANCE
    Bahtiar Rahmat (1), Mohammad Burhan Rubai Wijaya (2), Fahmy Zuhda Bahtiar (3), Yuris Bahadur Wirawan (4), Katiko Imamul Muttaqin (5)
    (1) Politeknik Industri Furnitur dan Pengolahan Kayu, Kendal, Indonesia ,
    (2) Universitas Negeri Semarang, Semarang, Indonesia ,
    (3) Universitas Ivet, Semarang, Indonesia ,
    (4) Universitas Ivet, Semarang, Indonesia ,
    (5) Politeknik Negeri Banjarmasin, Banjarmasin, Indonesia
    50-63
    DOI : 10.23917/mesin.v25i1.3266
    Abstract View : 365
    pdf 7 downloads: 110
    DOI: https://doi.org/10.23917/mesin.v25i1.3266
  • Cover Image
    DESIGN AND ANALYSIS OF CHASSIS FRAME FOR CHOPPER-STYLE MOTORCYCLE
    Apri Rahmadi (1), Mursalin Mursalin (2)
    (1) Universitas Muhammadiyah Pontianak, Pontianak, Indonesia ,
    (2) Universitas Muhammadiyah Pontianak, Pontianak, Indonesia
    64-76
    DOI : 10.23917/mesin.v25i1.3224
    Abstract View : 628
    pdf 8 downloads: 223
    DOI: https://doi.org/10.23917/mesin.v25i1.3224